The use of Bricks or Pavers to produce a sidewalk or outdoor patio complements a home in a way that is unrivaled. In addition, setting up a Brick or Paver walkway does not always require a pro.
The secret to installing a Brick or Paver Walkway is to very first properly prepare the area where the bricks/pavers are to be set up. In addition, string lines must be strung on each side of the walkway.
As soon as the area has been dug, 3/4" gravel stone ought to be laid in and tamped down firmly. Then 2" of sand, or stone dust ought to be topped the gravel. Again the sand/stone dust should be tamped down. Stone dust is preferred. The height between the tamped down sand and the stringline need to equate to the thickness of the brick or paver.
Now that you have a steady base, put a 1" pipeline or ledger board the length of the walkway on either side of the sidewalk. Using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.
Now place on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the ready area. These strips will act as your sidewalk border and aid to preserve the stability and shape of the walkway.
You can then begin to lay the bricks/pavers once this is done. There are numerous patterns you can lay. I especially like the Herring Bone pattern. The secret to laying the bricks/pavers is to make sure that they interlock with each other. Constantly stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again help preserve the integrity of the pathway.
When constructing the pathway, inevitably bricks/pavers will need to be cut or divided. Unless you wish to buy or lease a pricey wetsaw, I would suggest buying a simple brick/paver splitter. It is basically a sculpt with a wide end that is the width of the bricks/pavers. To actually cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the spot where you wish to break the brick. Utilizing a hammer strike the butt end of the chisel firmly. You may require to do this a couple of times. You may also wish to flip the brick/paver over and strike the opposite of the brick using the hammer and chisle. Within one or 2 strikes the brick/paver must break cleanly. , if your walkway has curves you will require to buy/rent a wetsaw.
.
After setting up the bricks, develop the outdoors edges with extra sand, and then shovel in the topsoil and load down securely.
Spread stone dust over the new walkway and sweep into the cracks. Repeat this process a couple of times to ensure the fractures are totally filled. This will finish the interlocking of the bricks and help to remove any weed growth. Simply add turf seed to the outdoors edges and you ought to have a gorgeous entrance to your home within a number of weeks.
In addition, setting up a Brick or Paver walkway does not always require a pro. The secret to installing a Brick or Paver Walkway is to very first appropriately prepare the location where the bricks/pavers are to be set up. Now that you have a stable base, position a 1" pipe or journal board the length of the sidewalk on either side of the pathway. These strips will act as your sidewalk border and help to automatic brick making machine preserve the stability and shape of the pathway. Undoubtedly bricks/pavers will require to be cut or split when developing the sidewalk.